Flexcut

Flexcut

Flexcut began manufacturing a new breed of woodcarving tools back in 1992. The Hook Knife blade is curved, similar to a gouge, for working in hollows with ease and fast stock removal.

FLEXCUT 1.5MM MICRO DEEP U-GOUGE CARVING TOOL

The Fine Detail Knife is designed for making fine detail cuts. The user has the ability to “choke up” on the blade for more precise cuts. The handle shape holds like a pencil or conventional knife.

Flexcut Tool Company Inc. was established in 1986 in Pennsylvania with the name Falls Run Woodcarving. The company was an America-based custom carving shop and woodcarving school back then. In 1992, Flexcut started manufacturing innovative and new woodcarving tools to cater to the needs of modern hobbyists and professionals. In the very beginning, the brand commenced with only 4 different tool profiles and today, Flexcut is the leading manufacturer of over 300 products developed for the woodcarving market.

The high carbon blade holds an edge extremely well and is easily maintained beavercraft by simple stropping. Each blade is honed, polished and ready to go.

If in case the products have any kind of manufacturing defect, then the buyer can send the tool along with a written explanation about the malfunctioning on the official address of Flexcut Tool Company, Inc. The buyer is also required to mention their complete address along with their names while sending the tool for replacement. The company is liable to pay the return shipping charges on its own expense. The company does not warrant its product against normal wear and misuse.

Carving tool design had not changed much since the industrial revolution, although the people practicing woodcarving did. Designed with an intimate knowledge of woodcarving itself, this new innovation has grown in popularity and variety. was founded in 1986, under the name of Falls Run Woodcarving, primarily as a custom carving shop and woodcarving school. In 1992 Flexcut began manufacturing a new breed of wood carving tools to address the needs of the modern hobbyist and professional.

Each tool is razor sharp, and ready to use. Flexcut is a leading developer of innovative carving tools for woodcarving. Flexcut Carving Tools are made in Pennsylvania of high quality spring steel – they’re thin, barely a 16th inch thick, completely flat and razor sharp with a mirror finish. Get both hand and power carving innovation with Flexcut Tools.

The handedness (right or left) is designated by pulling the tool toward you. The Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 1-1/2 inch blade can accommodate larger stock removal if needed. Beginning with only four different profile tools, they now produce over 300 products for the woodcarving market. Axminster has carefully selected just over 100 of these, keeping your collection razor sharp.

The company shows an unwavering commitment to its customers with continuous improvements and innovation, delivering products that utilize cutting edge technology. Flexcut has never compromised with the quality of its products, making them preferable. Flexcut workers continue to add state-of-the-art equipment and procedures, helping them to concentrate on the details that result in the manufacturing and on-time delivery of user-friendly products. Whether you whittle professionally or just for fun, Flexcut’s whittling knives will give you better results. The razor sharp edge provides greater control over each cut and the ergonomic handle lets you carve longer without hand fatigue.

• The blades, made from high-carbon spring steel hardened to Rc55-58, take and hold an edge exceptionally well, and are supplied fully honed and ready for use.
• Knife is perfectly sharpened and ready for carving straight out of package.
• American-made and designed with an intimate knowledge of the art of wood sculpture.
• If in case the products have any kind of manufacturing defect, then the buyer can send the tool along with a written explanation about the malfunctioning on the official address of Flexcut Tool Company, Inc.
• You can browse through the inventory of Flexcut for checking out high-quality wood carving tools, carving knives, gouges, and chisels for hand or power carving.
• The buyer is also required to mention their complete address along with their names while sending the tool for replacement.

The Mini-Detail Knife has the smallest 3/4 inch straight blade. It is made from ultra-thin material to not disturb adjacent wood for very delicate cuts. The Mini-Chip Carving Knife has a 5/8 inch ultra-thin blade, making unwanted chipping in beavercraft delicate cuts less likely. The traditional Chip Carving Knife is a short-bladed knife used to make triangular shaped cuts to create intricate designs in wood. Designs carved in this fashion are cut into the wood or incised, not relieved.

Discover and explore the relaxing world of wood carving through the use of Flexcut’s expert carving tools and knives designed for the beginner and expert alike. Browse the entire Hobbies range of Flexcut tools and accessories and you no doubt find something to pique your interest. Flexcut has employed skilled artisans who have an intense passion for the craft and a desire to exceed customer expectations. The Flexcut artisans work with their hands, brains, and heart in sync that helps them to drive the style and function of their unique tools.

Knife is perfectly sharpened and ready for carving straight out of package. Handy folding carving knives. Always have your carving tool by your side.

Modern tools for traditional craft – these are wood carving knives by American maker https://bestwoodcarvingtool.com/. You can find standard knives or folding ones with nearly inexhaustible amount of blades profiles. Flexcut were established in 1986 as a custom carving shop and carving school, and soon after began manufacturing a new breed of wood carving tool to address the needs of the modern carver. Flexcut focusses on designing the products with an intimate knowledge of woodcarving.

The handle shape holds like a pencil or conventional knife. The Radius Knife has a curved bevel and blade for making push cuts, slice cuts and v-shaped cuts. The skewed curvature of the bevel allows for a rolling action and allows for a different approach.

Flexcut Detail Jack

The sharper edges of these wooden carved tools are accountable for their durability. The routine maintenance of these tools by Flexcut involves a periodical stropping on both sides of the edge with Flexcut’s patented polishing compounds. Products in the inventory come with an instruction manual that contains all the important information from how to use it to how to store it. Thus, Flexcut has become the prime choice of many beginners.